{"id":3531,"date":"2026-10-14T12:31:56","date_gmt":"2026-10-14T04:31:56","guid":{"rendered":"http:\/\/www.poceroseconomicos.com\/blog\/?p=3531"},"modified":"2026-10-14T12:31:56","modified_gmt":"2026-10-14T04:31:56","slug":"what-are-the-materials-used-in-the-construction-of-centrifugal-fans-4a53-cd31ce","status":"publish","type":"post","link":"http:\/\/www.poceroseconomicos.com\/blog\/2026\/10\/14\/what-are-the-materials-used-in-the-construction-of-centrifugal-fans-4a53-cd31ce\/","title":{"rendered":"What are the materials used in the construction of centrifugal fans?"},"content":{"rendered":"

Hey there, if you\u2019ve ever stopped to think about how the loud, powerful centrifugal fans that keep warehouses, mines, or even big HVAC systems running smoothly are built, you might not have realized just how much thought goes into choosing every single material. As a centrifugal fan supplier, I get asked this question all the time\u2014usually from folks who need a fan that can handle messy, dirty air, or stand up to extreme temperatures, and they want to make sure it\u2019s built to last, not just make a quick sale. Let me break down the key materials we use, why we pick them, and when we\u2019ll swap something out for a different one because that\u2019s the stuff that actually matters for getting the job done. Centrifugal Fans<\/a><\/p>\n

<\/p>\n

First off, the main component that takes most of the abuse in a centrifugal fan is the housing\u2014that big, spiral-shaped shell that guides the air from the inlet to the outlet of the fan. Most of the standard housings we make are from carbon steel, specifically mild steel, like A36 or Grade 50. Why? It\u2019s cheap, easy to cut, bend, and weld, and it\u2019s got enough strength to handle the normal pressures a centrifugal fan pushes through without breaking a sweat. But wait, if you\u2019re moving air that has stuff in it\u2014like dust, wood chips, or even small metal shavings that\u2019ll wear the housing down over time\u2014mild steel\u2019s not gonna cut it. That\u2019s when we switch to abrasion-resistant steel, like AR400 or AR500. These are hardened steels that are way more resistant to scraping and gouging, so they last way longer in industrial settings where the housing would otherwise wear through in a year or two. I had a customer last year who ran a wood mill\u2014they were moving sawdust nonstop with a standard mild steel fan, and after 18 months, the housing was thin enough that air was leaking out. Switched them to an AR400 housing, and now two years later, they still haven\u2019t had to touch it. That\u2019s the kind of stuff we do every day.<\/p>\n

Another big one for housings is galvanized steel. We use that for the smaller, lighter-duty fans\u2014like the ones in office building HVAC systems that move clean air, no junk in it. Galvanized steel has a zinc coating that stops it from rusting, so it doesn\u2019t need painting, and it\u2019s way cheaper than stainless steel for those applications. I always tell folks, though\u2014don\u2019t use galvanized for fans that move hot air, like over 200 degrees Fahrenheit, because the zinc coating breaks down, and then you\u2019re back to regular steel rusting. That\u2019s a rookie mistake I see people make all the time.<\/p>\n

Now, if you\u2019re dealing with super harsh stuff\u2014chemical fumes, corrosive gases, even salt air near the coast\u2014neither mild steel nor galvanized is gonna hold up. That\u2019s when we go to stainless steel, usually 304 or 316 grade. 304 is the workhorse for general corrosion resistance, like moving mildly corrosive fumes, and it\u2019s more affordable than 316. But if you\u2019re dealing with stuff like sulfuric acid, or salt water, 316 is the way to go\u2014it has molybdenum added that makes it way better at resisting those corrosions. We did a big project a while back for a seafood processing plant, and their original fan was stainless 304 that rusted out in six months from the brine fumes. Switched them to 316, and now it\u2019s been four years no issues. That\u2019s the difference between picking the right material and wasting money on a cheap fan that dies fast.<\/p>\n

Next up, the impeller\u2014 that\u2019s the rotating part that actually moves the air, right? It\u2019s got blades that spin super fast, so this part needs to be strong, balanced, and able to handle centrifugal force. For standard, clean air applications, impellers are usually mild steel or galvanized steel, same as the housing. But again, if you\u2019re moving dusty, abrasive air, impeller blades take a beating. We\u2019ll coat those with a hard ceramic-based coating, or even use a weld-on abrasion-resistant overlay on the blades. That adds a ton of life\u2014last year we had a customer in a cement plant, their original impeller would last 12 months before the blades wore down. We coated theirs with a tungsten carbide overlay, and it\u2019s been three years now, still going strong. Even better, if you\u2019re dealing with corrosive air, impellers can be stainless steel, same as the housing.<\/p>\n

Wait, there\u2019s also something called aluminum impellers. We use those for fans that need to be lightweight\u2014like in aerospace applications, or fans that spin at super high speeds, where weight matters for balance. Aluminum is lighter than steel, so it puts less stress on the motor and bearings, which makes the fan more efficient. But aluminum isn\u2019t good for high heat or corrosive stuff, so we only use it for specific jobs. I actually had a guy from a drone manufacturer hit me up a while back asking for a small centrifugal fan for a cooling system, and aluminum was perfect for that\u2014light, strong enough for the high RPMs they needed.<\/p>\n

Now, the motor and bearings\u2014wait, those are part of the fan too, right? The motor housing is usually cast iron. Cast iron is tough, absorbs vibration really well, and can handle the heat from the motor. We use gray cast iron mostly, which is cheap and durable, and it doesn\u2019t crack if it bumps into something, unlike cast steel. For bearings, we use either steel ball bearings or roller bearings. Roller bearings are for heavy-duty fans that move a lot of air, like 10,000 CFM or more, because they can handle more load. Ball bearings are good for smaller, lighter fans. Sometimes, for fans that run 24\/7, we\u2019ll use lubrication-free bearings so you don\u2019t have to oil them all the time\u2014those are a big hit with mines and warehouses where maintenance time is limited.<\/p>\n

Wait, what about when things get really hot? Like, if the fan is moving air at 500 degrees or more? Regular steel melts or warps, so we have to use materials like high-temperature alloy steel, like Inconel, or even stainless steel 310, which is made to stand up to extreme heat. We did a fan for a power plant a few years back that moved exhaust gases at 600 degrees, and they tried a standard steel fan first, but it warped within a week. Switched them to 310 stainless, and it\u2019s been going strong for five years. That\u2019s the kind of specialized stuff we deal with all the time\u2014you can\u2019t just grab a generic fan off the shelf for that, you have to pick the right material for the temp.<\/p>\n

Also, let\u2019s not forget about gaskets and seals\u2014those small parts that keep air from leaking between the housing and the inlet\/outlet. Most of the time, we use rubber gaskets, like EPDM, which is resistant to heat and mild chemicals. But if you\u2019re dealing with really hot air, high-temperature silicone gaskets, or even metal gaskets made of copper, work better. I once had a customer with a kiln fan that got up to 800 degrees, and regular rubber gaskets would melt, so we switched to graphite-impregnated gaskets, and that fixed the air leaks they were having.<\/p>\n

Let me be real with you here\u2014 I\u2019ve seen so many people cut corners on materials to save a buck, and it always comes back to bite them. A fan made with cheap mild steel for a dusty industrial job might cost 20% less upfront, but it\u2019ll last half as long as one made with abrasion-resistant steel, so you end up spending more money replacing it over time. That\u2019s why we always ask our customers a bunch of questions first: what are you moving? How hot is it? How much abuse is the fan gonna take? Do you need it to run 24\/7, or only part time? Because that\u2019s how we pick the right materials, not just what\u2019s cheapest.<\/p>\n

Another thing we do sometimes is mix materials if that makes sense. Like, a housing made of mild steel, but the impeller blades coated with abrasion-resistant material, if the main issue is the blades wearing out, not the housing. That saves money without cutting corners on the parts that matter most. Or, a fan with a stainless steel impeller but a mild steel housing\u2014only go full stainless if the whole thing is exposed to corrosion, otherwise you\u2019re wasting money on parts that don\u2019t need to be stainless.<\/p>\n

Wait, what about plastic fans? I\u2019ve seen those for really small, light-duty applications, like bathroom exhaust fans. We don\u2019t usually carry those, because they\u2019re not built for heavy industrial use\u2014they\u2019ll melt if the air is too hot, or break if you put too much pressure through them. But for their intended purpose, they\u2019re fine. Our business is heavy-duty centrifugal fans for industrial, commercial, and HVAC use, so we stick to metals mostly, because they\u2019re durable and handle the conditions we deal with.<\/p>\n

I also want to mention corrosion is a big one people don\u2019t think about until it\u2019s too late. If you put a fan near a swimming pool, or a chemical plant, or even just a place that\u2019s humid all the time, regular steel will rust, which makes the fan unbalanced and causes it to vibrate, which wears out the motor and bearings faster. So picking the right coating or material is key. We have fans with powder-coated finishes too, which add an extra layer of protection against rust for mild steel housings\u2014great for commercial buildings where they don\u2019t want to see a rusted fan in their hallway.<\/p>\n

<\/p>\n

Let me wrap this up\u2014at the end of the day, the materials for centrifugal fans aren\u2019t just random picks. Every single one is chosen based on what the fan is gonna be used for. As a supplier, our job isn\u2019t just to sell a fan, it\u2019s to make sure the fan works for your specific job, lasts as long as possible, and doesn\u2019t cost you more in repairs or replacements down the line. We\u2019ve got experience with all these materials, we know what works and what doesn\u2019t, and we\u2019re not gonna try to upsell you on something you don\u2019t need.<\/p>\n

EC Plug Fans<\/a> If you\u2019re in the market for a centrifugal fan, whether it\u2019s for a warehouse, a mine, an HVAC system, or any other job, hit us up. We can walk you through the material options, figure out exactly what you need, and get you a fan that\u2019s built to handle whatever you throw at it. No jargon, no nonsense, just straight talk and a fan that works.<\/p>\n

References<\/h2>\n
    \n
  1. ASHRAE Handbook: HVAC Systems and Equipment, American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2020.<\/li>\n
  2. Centrifugal Fan Design and Application Manual, Air Movement and Control Association International (AMCA), 2019.<\/li>\n
  3. Corrosion Resistance of Engineering Alloys, NACE International, 2018.<\/li>\n
  4. Industrial Centrifugal Fans: Selection, Operation, and Maintenance, McGraw-Hill Education, 2017.<\/li>\n
  5. Abrasion-Resistant Materials for Industrial Equipment, Association for Materials Protection and Performance (AMPP), 2021.<\/li>\n<\/ol>\n
    \n

    Suzhou Blauberg Motoren Technology Co., Ltd.<\/a>
    Suzhou Blauberg Motoren Technology Co., Ltd. is one of the most professional centrifugal fans manufacturers and suppliers in China, featured by quality products and good service. Please rest assured to buy bulk customized centrifugal fans from our factory. Welcome to contact us for quotation.
    Address: No. 8, Zhu Street, Industrial Park, Suzhou, JiangSu, China
    E-mail: Andie@blauberg.cn
    WebSite:     https:\/\/www.blaubergmotors.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, if you\u2019ve ever stopped to think about how the loud, powerful centrifugal fans that … What are the materials used in the construction of centrifugal fans?<\/span>Read more<\/a><\/p>\n","protected":false},"author":912,"featured_media":3531,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3494],"class_list":["post-3531","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-centrifugal-fans-4262-cd7266"],"_links":{"self":[{"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/posts\/3531","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/users\/912"}],"replies":[{"embeddable":true,"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/comments?post=3531"}],"version-history":[{"count":0,"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/posts\/3531\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/posts\/3531"}],"wp:attachment":[{"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/media?parent=3531"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/categories?post=3531"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.poceroseconomicos.com\/blog\/wp-json\/wp\/v2\/tags?post=3531"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}